Hi all, i need advice on replacing the STK on an Akai amp.

The original died a year ago, i’ve got a couple new STKs but i’m not sure if i’ll be capable of replacing it since many people on ther forum told me i should check a bunch electrical things on the pins first so, what at first was a simple “desolder the old one and solder in the new one” turned into a “damn… should I be doing this??”.
Worst part is there are not many trustable technicians where i live

​

So, am i safe just replacing the STK or i should be aware of a lot other stuff?

  • Space_Man_Spiff_2@alien.topBEnglish
    1·
    10 months ago

    If the pins on the STK s are in the open it shouldn’t be too difficult. Heat the pin where it solders onto the PCB…then use a desolder pump or wick to remove solder. Clean away any debris or solder left overs. Remove & install the module. Be careful to make sure pins go thru correctly and don’t bend. Resolder, check for any shorts or unwanted connections…Magnifying glasses or visor would be really helpful, a dental tool can come in handy to check/clean between pins. Good small point soldering iron is needed of course, one meant electronic PCB repairs. Dim bulb tester is a good idea too.