I just posted a very similar build for the 6XX here. It’s so freeing to not have to deal with wires. Being able to enjoy music while you wanna round the house and not worry about snagging cables or hitting buttons while it’s in your pocket is fantastic.
It really is, and that setup looks nice. I did something similar with my 598s before I got my Edition XS, but those headphones only have one connector, so I could just use a short 3.5mm cable and didnt have to mess with soldering in order to receive nice results.
I was initially not going to use sleeving and just have the wires kind of seperate like that, but I was concerned about durability, especially with the very thin wires I used. At least with sleeving it’s harder to pull on an individual wire.
Would be interested to see which cable you used and how you mounted it for the 560s. I’ve been wanting to do it for those too but I can’t come up with a solution that’s as clear as the 6XX. They’re almost made for it with the way the 5K can clip right onto the band cleanly, etc. I’d rather not use adhesive or velcro or bands, etc to hold it onto the 560s.
Would be interested to see which cable you used and how you mounted it for the 560s. I’ve been wanting to do it for those too but I can’t come up with a solution that’s as clear as the 6XX. They’re almost made for it with the way the 5K can clip right onto the band cleanly, etc. I’d rather not use adhesive or velcro or bands, etc to hold it onto the 560s.
A perfect cable would be a bit shorter, male (angled maybe?) 3.5mm to slim male 2.5mm TRRS but I don’t think such a cable exists.
Also, the suspension strap is actually just a third party Apple Watch nylon solo loop. It’s elastic and works surprisingly well, did it as an experiment but have kept it because of how well it works.
These are probably my most used headphones, despite owning a pair of HE1000 Stealth. They are just so convenient and comfortable, weighing just 277 g.
I just posted a very similar build for the 6XX here. It’s so freeing to not have to deal with wires. Being able to enjoy music while you wanna round the house and not worry about snagging cables or hitting buttons while it’s in your pocket is fantastic.
It really is, and that setup looks nice. I did something similar with my 598s before I got my Edition XS, but those headphones only have one connector, so I could just use a short 3.5mm cable and didnt have to mess with soldering in order to receive nice results.
I was initially not going to use sleeving and just have the wires kind of seperate like that, but I was concerned about durability, especially with the very thin wires I used. At least with sleeving it’s harder to pull on an individual wire.
Makes me want to post my same but different HD560S with Q5K and suspension strap. Just a single 20cm cable on one side, it’s great
Would be interested to see which cable you used and how you mounted it for the 560s. I’ve been wanting to do it for those too but I can’t come up with a solution that’s as clear as the 6XX. They’re almost made for it with the way the 5K can clip right onto the band cleanly, etc. I’d rather not use adhesive or velcro or bands, etc to hold it onto the 560s.
Would be interested to see which cable you used and how you mounted it for the 560s. I’ve been wanting to do it for those too but I can’t come up with a solution that’s as clear as the 6XX. They’re almost made for it with the way the 5K can clip right onto the band cleanly, etc. I’d rather not use adhesive or velcro or bands, etc to hold it onto the 560s.
https://i.imgur.com/Of6gBXK.jpg https://i.imgur.com/pBIuBC9.jpg https://i.imgur.com/fb25cMx.jpg
True, I have to use velcro but I do prefer having the cable from the Qudelix pointing down so it’s fine with me.
This is the cable I use. TRRS so I get sound from both channels. I had to cut the plastic down around the 2.5mm plug to make it fit in the HD560S port. Between the cable I need a male to male adapter.
A perfect cable would be a bit shorter, male (angled maybe?) 3.5mm to slim male 2.5mm TRRS but I don’t think such a cable exists.
Also, the suspension strap is actually just a third party Apple Watch nylon solo loop. It’s elastic and works surprisingly well, did it as an experiment but have kept it because of how well it works.
These are probably my most used headphones, despite owning a pair of HE1000 Stealth. They are just so convenient and comfortable, weighing just 277 g.
Thanks I’ll see if I can use some of these ideas.