Hi all.

I’ve replaced all of the electrolytic capacitors on the akai am-u1. And left the original films and ceramics in place.

Some had made it to the age of 40 and others like to low leakage orange 1uf 50v nippons hadn’t.

It doesn’t sound to bad considering. Not quite up there with the Cambridge audio axa25, but not bad.

The only thing that made me pause before was the woofers moving out, slightly back in, out and then fully back in on power up.

I’m measuring a few milli volts occasionally at the speaker outputs but other than that nothing.

I assume there’s 2 film capacitors near the outputs on filtering duty.

Is this a normal occurance on budget 80’s gear?.

    • Space_Man_Spiff_2@alien.topBEnglish
      1·
      10 months ago

      I suspect that you really don’t have an issue with the amp. It’s just a normal power up effect. On the other channel it’s C224-C225. You could replace the 2 electrolytic caps, but it’s probably not going to change anything.

      • wima1972@alien.topOPBEnglish
        1·
        10 months ago

        Thanks bud. I replaced the nippons with new nichicons after the pic was taken.

        It’s the yellow 0.1uf’s at c125 and c225 I haven’t touched.

        I’m assuming they’re polyester film and two mks 0.1uf wimas would be a more modern replacement?.